| Seismic Electric Detonators |
Premier Seismic Electric Detonators are a high strength, static resistant electric detonator designed specifically to meet the rigid requirements and severe environmental conditions associated with geophysical exploration. |
| SPECIFICATIONS: |
| |
| 1. |
Type |
Non Delay Instantaneous Electric Detonators |
| 2. |
Strength |
No. 8
|
| 3. |
Shell Material |
Aluminium / Copper |
| 4. |
Lead wire length |
1.8 m and more
|
| 5. |
Firing current |
10 Amperes |
| 6. |
|
1.4 to 2.0 Ohms
|
| 7. |
Lead wire material |
Copper |
| 8. |
Reaction time |
Less than 1 milli second
|
| 9. |
Capability of withstanding high hydrostatic pressure |
Capable |
| 10. |
Capability to meet the critical need for seismic prospecting
|
Capable
|
| 11. |
Stray current protection property |
It has stray current protection property such that it will not fire when a current of 250 mA for 5 minutes is applied. |
| 12. |
|
Provided up to 30 KV & 750 Pico-farads between the wires and detonator shell.
|
|
| USES : |
| • |
Exclusively used for Geophysical Seismic Exploration job, basically for the Oil & Gas Industries. |
| ADVANTAGE : |
| 1. |
Précised and uniform initiation. |
| 2. |
With anti-static protection. |
| PACKING : |
| • |
These detonators are packed in a wooden case. The number of detonators per case varies depending on the length of the lead wires. |
| STORAGE : |
| • |
These detonators should be stored in a cool, dry, well ventilated approved magazine. |
| Classification : |
| CCE Classification |
Class 6 & Division 3
|
| UN Classification |
UN 1.1 B 0030 |
|
| |
| Case-Dimension (mm): |
| |
